Juniper QFX3000-G QFabric, Deployment Manual, Page: 435 / 652

To download the license keys:
•
Select the
Download to this computer
option button, and click
OK
.
To e-mail the license keys:
• Select the Send e-mail to e-mail ID option button, and click OK .
Related
Documentation
Software Features That Require Licenses on the QFX Series on page 77
•
•
Performing the QFabric System Initial Setup on a QFX3100 Director Group on page 362
•
Adding New Licenses (CLI Procedure) on page 409
•
show version
Adding New Licenses (CLI Procedure)
Supported Platforms EX Series , J Series , M Series , MX Series , PTX Series , QFabric System , QFX Series standalone
switches , SRX Series , T Series
Before adding new licenses, complete the following tasks:
• Purchase the required licenses.
•
Establish basic network connectivity with the router or switch. For instructions on
establishing basic connectivity, see the
Getting Started Guide or Quick Start Guide for
your device.
NOTE: On QFabric systems, install your licenses in the default partition of
the QFabric system and not on the individual components (Node devices
and Interconnect devices).
To add a new license key to the device using the CLI:
1.
From the CLI operational mode, enter one of the following CLI commands:
• To add a license key from a file or URL, enter the following command, specifying
the filename or the URL where the key is located:
user@host> request system license add filename | url
• To add a license key from the terminal, enter the following command:
user@host> request system license add terminal
2.
When prompted, enter the license key, separating multiple license keys with a blank
line.
If the license key you enter is invalid, an error appears in the CLI output when you press
Ctrl+d to exit license entry mode.
409 Copyright © 2015, Juniper Networks, Inc.
Chapter 18: QFabric System Licensing