Juniper QFX3000-G QFabric, Deployment Manual, Page: 22 / 652

If the example configuration does not start at the top level of the hierarchy, the example
is a
snippet . In this case, use the
load merge relative
command. These procedures are
described in the following sections.
Merging a Full Example
To merge a full example, follow these steps:
1.
From the HTML or PDF version of the manual, copy a configuration example into a
text file, save the file with a name, and copy the file to a directory on your routing
platform.
For example, copy the following configuration to a file and name the file
ex-script.conf
.
Copy the
ex-script.conf
file to the
/var/tmp
directory on your routing platform.
system {
scripts {
commit {
file ex-script.xsl;
}
}
}
interfaces {
fxp0 {
disable;
unit 0 {
family inet {
address 10.0.0.1/24;
}
}
}
}
2.
Merge the contents of the file into your routing platform configuration by issuing the
load merge
configuration mode command:
[edit]
user@host#
load merge /var/tmp/ex-script.conf
load complete
Merging a Snippet
To merge a snippet, follow these steps:
1.
From the HTML or PDF version of the manual, copy a configuration snippet into a text
file, save the file with a name, and copy the file to a directory on your routing platform.
For example, copy the following snippet to a file and name the file
ex-script-snippet.conf
. Copy the
ex-script-snippet.conf
file to the
/var/tmp
directory
on your routing platform.
commit {
file ex-script-snippet.xsl; }
2.
Move to the hierarchy level that is relevant for this snippet by issuing the following
configuration mode command:
Copyright © 2015, Juniper Networks, Inc. xxii
QFX3000-G QFabric System Deployment Guide