Juniper QFX3000-G QFabric, Deployment Manual, Page: 595 / 652

show chassis lcd
Supported Platforms EX Series , QFabric System , QFX Series standalone switches
List of Syntax show chassis lcd (EX Series) on page 569
show chassis lcd (QFX Series and QFabric Systems) on page 569
show chassis lcd (EX
Series)
show chassis lcd
<fpc-slot
fpc-slot-number >
<menu <(all-members | local | member member-id )>>
show chassis lcd (QFX
Series and QFabric
Systems)
show chassis lcd
<fpc-slot
fpc-slot-number >
<interconnect-device device-id >
<node-device device-id >
Release Information Command introduced in Junos OS Release 9.0 for EX Series switches.
menu
option introduced in Junos OS Release 10.2 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 13.1 for QFabric systems.
Description Display the information that appears on the LCD panel of EX3200, EX3300, EX4200,
EX4500, EX6200, and EX8200 switches, XRE200 External Routing Engines, QFX Series
standalone switches, and Interconnect devices and Node devices within a QFabric system.
Display the status of the currently selected port parameter of the Status LED for each
network port on the device.
Options
none
—Display the information that appears on the LCD panel (for any EX Series member
switch in a Virtual Chassis or for XRE200 External Routing Engines, display the
information for all Virtual Chassis members). Display the status of the currently
selected port parameter of the Status LED for each network port.
fpc-slot < fpc-slot-number > —(Optional) Display the information as follows:
•
(EX3200, EX3300, EX4200, and EX4500 switches, or the QFX Series) Display the
information that appears on the LCD panel for either an FPC slot with no
fpc-slot-number
value specified or for the FPC slot specified by
fpc-slot 0
.
fpc-slot
refers to the switch itself and
0
is the only valid value for
fpc-slot-number
. Output
for these options is the same as for the
none
option.
Also display the status of the currently selected port parameter of the Status LED
for each network port.
•
(EX Series Virtual Chassis member switches or XRE200 External Routing Engines)
If no
fpc-slot-number
value is specified, display the information that appears on
the LCD panel for all members of the Virtual Chassis. Output for this option is the
same as for the
none
option. If the
fpc-slot-number
value is specified (it equals the
member-id
value), display the information for the specified member.
Also display the status of the currently selected port parameter of the Status LED
for each network port.
569 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands