Juniper QFX3000-G QFabric, Deployment Manual, Page: 105 / 652

Table 14: Junos OS Feature Licenses and Model Numbers for QFX Series Devices (continued)
Model Number
Number of Licenses
Required
Supported Devices Licensed Software Feature
QFX3000-JSL-EDGE-FAB One per device QFX3500 and QFX3600
device QFX Series feature license for
enabling fabric mode
QFX3008-JSL-DRCTR-FAB One per QFX3000-G
QFabric system QFX3100 Director device QFX Series feature license for
base software for QFX3000-G
QFabric system
QFX3000M-JSL-DRCTR-FAB One per QFX3000-M
QFabric system QFX3100 Director device QFX Series feature license for
base software for QFX3000-M
QFabric system
Related
Documentation
Junos OS Feature Licenses on page 77
•
•
Junos OS License Keys on page 79
•
Generating the License Keys for a Standalone QFX Series Device
•
Generating the License Keys for a QFabric System on page 407
•
Adding New Licenses (CLI Procedure) on page 409
•
Deleting a License (CLI Procedure) on page 410
•
Saving License Keys on page 411
•
Verifying Junos OS License Installation on page 412
Junos OS License Keys
Supported Platforms EX Series , J Series , M Series , MX Series , PTX Series , QFabric System , QFX Series standalone
switches , SRX Series , T Series
Licensable Ports on MX5, MX10, and MX40 Routers
Starting with Junos OS Release 12.2, license keys are available to enhance the port capacity
on MX5, MX10, and MX40 routers up to the port capacity of an MX80 router. The MX5,
MX10, and MX40 routers are derived from the modular MX80 chassis with similar slot
and port assignments, and provide all functionality available on an MX80 router, but at
a lower capacity. Restricting port capacity is achieved by making a set of MIC slots and
ports licensable. MICs without a license are locked, and are unlocked or made usable by
installing appropriate upgrade licenses.
The base capacity of a router is identified by the Ideeprom assembly ID (I2C ID), which
defines the board type. However, the Junos OS licensing infrastructure allows the use of
restricted ports without a license for a grace period of 30 days. After the grace period
expires, the router reverts back to the base capacity if no upgrade license is purchased
and installed for the locked ports. The I2C ID along with an upgrade license determine
the final capacity of an MX5, MX10, or MX40 router.
79 Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Licenses