Juniper QFX3000-G QFabric, Deployment Manual, Page: 511 / 652

ssh Start secure shell on another host
start Start shell
telnet Telnet to another host
test Perform diagnostic debugging
traceroute Trace route to remote host{master}
qfabric-admin@node-ee3093>
request component login (with qfabric-operator Privileges)
operator@qfabric> request component login EE3093
Warning: Permanently added 'qfabric-node-ee3093,169.254.128.41' (RSA) to the list
of known hosts.
--- JUNOS 11.3I built 2011-11-04 12:46:16 UTC
{master}
qfabric-operator@node-ee3093> ?
Possible completions:
file Perform file operations
help Provide help information
load Load information from file
op Invoke an operation script
quit Exit the management session
request Make system-level requests
save Save information to file
set Set CLI properties, date/time, craft interface message
show Show system information
start Start shell
test Perform diagnostic debugging
{master}
qfabric-operator@node-ee3093>
request component login (with qfabric-user Privileges)
user0@qfabric>
request component login EE3093
error: User user0 does not have sufficient permissions to login to device ee3093
485 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands