Juniper QFX3000-G QFabric, Deployment Manual, Page: 513 / 652

request fabric administration remove
Supported Platforms QFabric System
Syntax request fabric administration remove (interconnect-device interconnect-device-name |
node-device node-device-name)
Release Information Command introduced in Junos OS Release 11.3 for the QFX Series.
Description (QFabric systems only) Remove a disconnected Interconnect or Node device from the
QFabric system inventory so that it does not appear in the output of the
show fabric
administration inventory command.
NOTE:
•
You cannot remove any devices that appear in the
Connected
state in the
output of the
show fabric administration inventory
command.
•
For Node devices, you can only remove a device if it belongs to an
autogenerated server Node group that contains a single Node device. Node
devices contained within redundant server Node groups or network Node
groups cannot be removed directly. To remove a Node device that is part
of a group, delete the device from the Node group configuration first before
attempting to remove the device from the inventory.
Options
interconnect-device interconnect-device-name
—Remove a disconnected Interconnect
device from the QFabric system inventory.
node-device node-device-name
—Remove a disconnected Node device from the QFabric
system inventory.
Required Privilege
Level
admin
Related
Documentation
show fabric administration inventory on page 584
•
•
show fabric administration inventory interconnect-devices on page 597
•
show fabric administration inventory node-devices on page 599
•
show fabric administration inventory node-groups on page 601
List of Sample Output request fabric administration remove interconnect-device on page 487
request fabric administration remove node-device on page 488
Sample Output
request fabric administration remove interconnect-device
user@qfabric>
request fabric administration remove interconnect-device IC1
Device successfully removed
487 Copyright © 2015, Juniper Networks, Inc.
Chapter 21: Operational Mode Commands