Juniper QFX3000-G QFabric, Deployment Manual, Page: 170 / 652

Unpacking a QFX3100 Director Device
Supported Platforms
QFabric System
The QFX3100 Director devices are shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box and quick start instructions.
CAUTION: QFX3100 Director devices are maximally protected inside the
shipping carton. Do not unpack the Director devices until you are ready to
begin installation.
To unpack a QFX3100 Director device (see Figure 17 on page 145 ):
1.
Move the shipping carton to a staging area as close to the installation site as possible
but where you have enough room to remove the system components.
2.
Position the carton so that the arrows are pointing up.
3.
Open the top flaps on the shipping carton.
4.
Remove the accessory box and verify the contents against the parts inventory.
5.
Pull out the packing material holding the QFX3100 Director device in place.
6.
Verify the components received against the inventory provided in Table 54 on page 145 .
7.
Save the shipping carton and packing materials in case you need to move or ship the
device later.
Copyright © 2015, Juniper Networks, Inc. 144
QFX3000-G QFabric System Deployment Guide