Juniper QFX3000-G QFabric, Deployment Manual, Page: 544 / 652

show chassis ethernet-switch interconnect-device cb
Supported Platforms QFabric System
Syntax show chassis ethernet-switch interconnect-device name cb
<detail>
<port number>
<slotnumber>
Release Information Command introduced in Junos OS Release 12.2 for the QFX Series.
Description (QFX3000-G QFabric systems only) Display Ethernet switch information for the Control
Board (CB) ports in an Interconnect device.
Options none —Display Ethernet switch information about each connected port on each online
CB in the Interconnect device.
detail
—(Optional) Display detailed status information for all CBs or for the CB in the
specified slot in the Interconnect device.
port number
—(Optional) Display Ethernet switch information about a specific port on a
CB in the Interconnect device.
slot number —(Optional) Display Ethernet switch information about a CB in a specific slot
in the Interconnect device.
Required Privilege
Level
view
List of Sample Output show chassis ethernet-switch interconnect-device cb on page 522
show chassis ethernet-switch interconnect-device cb detail on page 523
show chassis ethernet-switch interconnect-device cb detail slot port on page 528
Output Fields Table 93 on page 518 lists the output fields for the show chassis ethernet-switch
interconnect-device cb command. Output fields are listed in the approximate order in
which they appear.
Table 93: show chassis ethernet-switch interconnect-device fpc Output Fields
Field Description Field Name
Information about the link between each port on the FPC's Ethernet switch and one of the following
devices:
• FWD-SWITCH-0
• FWD-SWITCH-1
• CB0
• CB1
Link is good on port n
connected to device
Speed at which the Ethernet link is running: 10 Mb When the device is RE or Other RE on the TX Matrix
router, the speed is 1000 Mb .
Speed is
Duplex type of the Ethernet link:
full
or
half
. Duplex is
Copyright © 2015, Juniper Networks, Inc. 518
QFX3000-G QFabric System Deployment Guide