Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 56 / 256

•
Port Code—port string for FDL
•
Generator Number—generator string for FDL
•
BERT test—Number of current test and total number of tests
•
Test interval—Length of the BERT test
•
status—Sync (controller is synchronized with remote device) or NoSync (controller
is not synchronized with remote device)
•
Sync count—Number of times the pattern detector synchronized with the incoming
data pattern
•
Received bit count—Number of bits received
•
Error bit count—Number of bits with errors
•
Number of valid intervals—Number of 15-minute intervals since the line module was
last powered on or reset
•
Time elapse in current interval—Statistics are reported in 15-minute intervals
•
Errored seconds—Number of errored seconds encountered by a T1 in the current
interval
•
Severely errored seconds—Number of severely errored seconds encountered by a
T1 in the current interval
•
Severely errored frame seconds—Number of severely errored framing seconds
encountered by a T1 in the current interval
•
Unavailable seconds—Number of unavailable seconds encountered by a T1 in the
current interval
•
Clock slip seconds—Number of clock slips encountered by a T1 in the current interval
•
Path code violations—Number of coding violations encountered by a T1 in the current
interval
•
Line errored seconds—Number of line errored seconds encountered by a T1 in the
current interval
•
Bursty errored seconds—Number of bursty errored seconds encountered by a T1 in
the current interval
•
Degraded minutes—Number of minutes that a T1 line is degraded
•
Line code violations—Number of line code violations encountered by a T1 in the
current interval
•
Example 1—In this example, a T1 channel and the brief keyword are specified.
host1# show controllers t1 2/0:1 brief
DS3 2/0:1
Copyright © 2010, Juniper Networks, Inc. 34
JunosE 11.2.x Physical Layer Configuration Guide