•
Use the
no
version to delete an unframed E1 interface from the path.
•
See path e1 unframed.
Configuring T1 and E1 Lines
You can configure T1 and E1 interfaces on paths and tributaries. To do so, complete the
following steps:
1.
Configure the clock source. You must coordinate this setting with the other end of
the line to establish which end is the transmit (internal) clock and which is the receive
(line) clock.
2.
(Optional) Configure the framing format.
3.
(Optional) Enable processing of SNMP link status information about an interface
and its associated tributary.
4.
Configure the T1 or E1 line parameters.
5.
(Optional) Enable processing of SNMP link status information about a channel group.
6.
(Optional—T1 only) Configure FDL messages.
7.
(Optional) Assign a text description or an alias to the interface.
path ds1|e1 channel-group description
•
Use to assign a text description or an alias to a DS1 (T1) or an E1 channel group for
channelized SONET and SDH interfaces.
•
You can use this command to help you identify the interface and keep track of interface
connections.
•
The description or alias can be a maximum of 80 characters.
•
Use “show controllers sonet ds1|e1” on page 153 to display the text description.
•
Example
host1(config-controller)#
path 10 e1 1/5/1 channel-group 4
description westford e1 151.4
•
Use the
no
version to remove the text description or alias.
•
See path ds1|e1 channel-group description.
path ds1|e1 channel-group shutdown
•
Use to disable a T1 or an E1 channel group.
•
T1 and E1 channel groups are enabled by default.
•
Example
host1 (config-controll)#
path 12 e1 1/4/1 channel-group 2 shutdown
•
Use the
no
version to restart a disabled channel group.
•
See path ds1|e1 channel-group shutdown.
path ds1|e1 channel-group snmp trap link-status
121
Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces
Summary of Contents for JUNOSE 11.2.X MULTICAST ROUTING
