Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 185 / 256

•
Errored seconds—Number of errored seconds encountered by a T1 in the current
interval
•
Severely errored seconds—Number of severely errored seconds encountered by a
T1 in the current interval
•
Severely errored frame seconds—Number of severely errored framing seconds
encountered by a T1 in the current interval
•
Unavailable seconds—Number of unavailable seconds encountered by a T1 in the
current interval
•
Clock slip seconds—Number of clock slips encountered by a T1 in the current interval
•
Path code violations—Number of coding violations encountered by a T1 in the current
interval
•
number of coding violations encountered by a T1 in the current interval
•
Line errored seconds—Number of line errored seconds encountered by a T1 in the
current interval
•
Bursty errored seconds—Number of bursty errored seconds encountered by a T1 in
the current interval
•
Degraded minutes—Number of minutes that a T1 line is degraded
•
Example 1—In this example, a T3 interface is specified.
host1# show controllers sonet 5/0:1/1 remote
Far End MDL Carrier bit is not set
Far End Equipment Identification Code is the null string
Far End Line Identification Code is the null string
Far End Frame Identification Code is the null string
Far End Unit Identification Code is the null string
Far End Facility Identification Code is the null string
Far End Generator Number is the null string
Far End Port Number is the null string
Number of valid interval - 3
Time elapse in current interval - 756
Ds3 Current Interval Counters
C-bit errored seconds = 0
C-bit severely errored seconds = 0
C-bit coding violations = 0
Unavailable seconds = 0
Invalid seconds = 0
Ds3 Last Interval Counters
C-bit errored seconds = 0
C-bit severely errored seconds = 0
C-bit coding violations = 0
Unavailable seconds = 0
Invalid seconds = 0
Ds3 24 Hour Total Counters
C-bit errored seconds = 1
C-bit severely errored seconds = 1
C-bit coding violations = 330
163 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces