Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 188 / 256

•
Ds0 mode—Nx56 or Nx64
•
5 minute input rate—Data rates based on the traffic received in the last five minutes
•
5 minute output rate—Data rates based on the traffic sent in the last five minutes
•
Interface Statistics
•
Packets received—Number of packets received on the interface
•
Bytes received—Number of bytes received on the interface
•
Errored packets received—Number of packets with errors received on the interface
•
Packets sent—Number of packets sent on the interface
•
Bytes sent—Number of bytes sent on the interface
•
Errored packets sent—Number of packets with errors sent from the interface
•
Example
host1# show interfaces serial 2/0:1/1/1/1/1
Serial Interface at 2/0:1/1/1/1/1
Description: toronto20 hdlc channel
ifOperStatus = ifOperUp
snmp trap link-status = disabled
Encapsulation hdlc
Crc type checking - CRC16
Hdlc mru = 1600
Hdlc mtu = 1600
Hdlc interface speed = 1536000
Hdlc idle-character marks
Invert data disabled, Ds0 time slot map = 0xffffff
Ds0 mode = Nx64
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Interface statistics
Packets received 100
Bytes received 1300
Errored packets received 1
Packets sent 100
Bytes send 1436
Errored packets sent 0
•
See show interfaces.
Monitoring APS/MSP
For information about monitoring APS/MSP, see “Monitoring APS/MSP” on page 102 in
“Configuring Unchannelized OCx/STMx Interfaces” on page 71.
Copyright © 2010, Juniper Networks, Inc. 166
JunosE 11.2.x Physical Layer Configuration Guide