Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 51 / 256

baseline interface serial
•
Use to set a statistics baseline for serial interfaces.
•
The router implements the baseline by reading and storing the statistics at the time
the baseline is set and subtracting this baseline whenever baseline-relative statistics
are retrieved.
•
Use the optional delta keyword with the show interfaces serial commands to view
the baseline statistics.
•
Example
host1# baseline interface serial 2/0:1/1
•
There is no no version.
•
See baseline interface.
show controllers t1
show controllers t3
•
Use to display data and MIB statistics for a T3 interface or a T1 channel.
•
Use the brief keyword to display the administrative and operational status of all
configured T3 interfaces, or to display abbreviated information for the specified T3
interface.
•
For definitions of the MIB statistics for a T3 interface, see RFC 2496—Definitions of
Managed Objects for the DS3/E3 Interface Types (January 1999).
•
For definitions of the MIB statistics for a T1 channel, see RFC 2495—Definitions of
Managed Objects for the DS1, E1, DS2 and E2 Interface Types (January 1999).
•
Field descriptions for T3 interface (T1 channel not specified)
•
Description—Text description or alias if configured for the interface
•
ifAdminStatus—One of the following administrative states of the interface:
•
ifAdminUp—Interface is administratively enabled
•
ifAdminDown—Interface is administratively disabled
•
ifAdminTesting—Interface is administratively configured in a testing state
•
snmp trap link-status —S tatus of SNMP trapping (enabled or disabled)
•
alarms detected—One of the following T3 alarms:
•
No alarm present—No alarms present on the line
•
Rcv RAI Failure—Remote device is sending a far end alarm failure
•
Xmt RAI Failure—Local device is sending a far end alarm failure
•
Rcv AIS—Remote device is sending an alarm indication signal (AIS)
•
Xmt AIS—Local device is sending an AIS
29 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring Channelized T3 Interfaces