Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 120 / 256

defect trigger soaking delay: 2500 milliseconds
c2 byte set by upper interface type
Operational Status: lowerLayerDown
time since last status change: 07:33:12
Received SONET Path overhead:
F2 : n/a, Z3 : n/a, Z4 : n/a, C2 : 0xFF, C2Exp
: 0x00
Transmitted SONET Path overhead:
F2 : 0x00, Z3 : 0x00, Z4 : 0x00, C2 : 0x00
•
See show controllers sonet.
show controllers sonet line | path | section
•
Use to display statistics for the different layers in channelized SONET and SDH
interfaces. Figure 5 on page 76 and Figure 6 on page 77 show the layers in the interfaces.
•
For definitions of the MIB statistics, see RFC 2558—Definitions of Managed Objects
for the SONET/SDH Interface Type (March 1999).
•
Specify an interface in slot/port format (ERX14xx models, ERX7xx models, and the
ERX310 router ) or slot/adapter/port format (E120 and E320 routers).
•
To view statistics for a layer, specify the type of layer.
•
To view all statistics for all sessions, specify the total keyword.
•
To view baselined statistics for all intervals, specify the delta total keywords.
•
Field descriptions
•
Current Interval Counters—Statistics for the current 15-minute interval
The following fields may appear in line, path, or section:
•
ES—Number of errored seconds encountered by a T1 or an E1 in an interval
•
SES—Number of severely errored seconds encountered in an interval
•
UAS—Number of unavailable seconds encountered in an interval
•
SEFS—Number of severely errored framing seconds encountered in an interval
•
(Code Violations)—Number of coding violations encountered in an interval (BIP-B1,
BIP-B2, BIP-B3)
•
RDI—Number of remote defect indications
•
AIS—Number of alarm indication signals
•
BERR-SF—Number of bit error rate signal failures
•
BERR-SD—Number of bit error rate signal degrades
•
LOS—Number of loss of signal alarms
•
LOF—Number of loss of frame alarms
•
LOP—Number of loss of pointers
Copyright © 2010, Juniper Networks, Inc. 98
JunosE 11.2.x Physical Layer Configuration Guide