Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 121 / 256

•
UNEQ—Number of unequipped alarms
•
PLM—Number of payload mismatchs
•
Last Interval Counters—Statistics for the previous 15-minute interval
•
Current Far End Interval Counters—Statistics for the remote connection associated
with the SONET/SDH path in the current 15-minute interval
•
REI—Number of remote error indications
•
Far End Last Interval Counters—Statistics for the remote connection associated with
the SONET/SDH path in the previous 15-minute interval
•
Total Interval Counters—Statistics for all intervals or baselined statistics
•
Total Far End Counters—Statistics for all remote connections associated with the
SONET/SDH path
•
Example 1—Shows the MIB statistics for the path layer on interface 1/0.
host1# show controllers sonet 1/0 path
Channel number 0
Number of valid intervals - 31
Time elapsed in current interval - 141
Current status = LowerLayerDefect
Current Path Interval Counters Seconds Counts State
ES 0
SES 0
UAS 141
RDI 141 0 Active
AIS 141 0 Active
LOP 0 0 OK
UNEQ 0 0 OK
PLM 141 0 Active
BIP-B3 (Code Violation) 0 0
Last Path Interval Counters Seconds Counts
ES 0
SES 0
UAS 900
RDI 900 0
AIS 900 0
LOP 0 0
UNEQ 0 0
PLM 900 0
BIP-B3 (Code Violation) 0 0
Total Path Counters Seconds Counts
ES 0
SES 0
UAS 27255
RDI 27255 0
AIS 27255 0
LOP 0 0
UNEQ 0 0
99 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Configuring Unchannelized OCx/STMx Interfaces