Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 181 / 256

Severely errored framing seconds = 0
Coding violations = 0
•
Example 2—This example illustrates the behavior of the baseline section interface
sonet command. The examples show the MIB statistics of the section layer before and
after the command is issued.
host1# show controllers sonet 2/0 section total
Number of valid intervals - 0
Time elapsed in current interval - 192
Current Section Interval Counters
Current status = No Defect
Errored seconds = 68
Severly errored seconds = 68
Severely errored framing seconds = 2
Coding violations = 4018
Total Section Counters
Errored seconds = 68
Severly errored seconds = 68
Severely errored framing seconds = 2
Coding violations = 4018
host1# baseline section interface sonet 2/0
host1# show controllers sonet 2/0 section total delta
Number of valid intervals - 0
Time elapsed in current interval - 209
Current Section Interval Counters
Current status = No Defect
Errored seconds = 68
Severly errored seconds = 68
Severely errored framing seconds = 2
Coding violations = 4018
Total Section Counters
Errored seconds = 0
Severly errored seconds = 0
Severely errored framing seconds = 0
Coding violations = 0
•
Example 3—This example shows the MIB statistics for the line layer on interface 2/1.
host1# show controllers sonet 2/1 line
Current Line Interval Counters
Current status = No Defect
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 190
Last Line Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 900
Current Far End Line Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 0
159 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces