Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 92 / 256

•
Unavailable seconds—Number of unavailable seconds encountered by a T3 in the
current interval
•
Invalid seconds—Number of seconds when statistics were not collected
•
Example—This example specifies a T3 interface.
host1# show controllers t3 5/0 remote
Far End MDL Carrier bit is not set
Far End Equipment Identification Code is the null string
Far End Line Identification Code is the null string
Far End Frame Identification Code is the null string
Far End Unit Identification Code is the null string
Far End Facility Identification Code is the null string
Far End Generator Number is the null string
Far End Port Number is the null string
Number of valid interval - 3
Time elapse in current interval - 756
Ds3 Current Interval Counters
C-bit errored seconds = 0
C-bit severely errored seconds = 0
C-bit coding violations = 0
Unavailable seconds = 0
Invalid seconds = 0
Ds3 Last Interval Counters
C-bit errored seconds = 0
C-bit severely errored seconds = 0
C-bit coding violations = 0
Unavailable seconds = 0
Invalid seconds = 0
Ds3 24 Hour Total Counters
C-bit errored seconds = 1
C-bit severely errored seconds = 1
C-bit coding violations = 330
Unavailable seconds = 0
Invalid seconds = 0
•
See show controllers t3 remote.
Copyright © 2010, Juniper Networks, Inc. 70
JunosE 11.2.x Physical Layer Configuration Guide