Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 96 / 256

Table 7: Explanation of K1 Byte
Meaning Bit Value (12345678)
Bits 1–4 represent a request.
No request 0000
Do not revert 0001
Reverse request 0010
Not used 0011
Exercise 0100
Not used 0101
Wait-to-restore 0110
Not used 0111
Manual switch 1000
Not used 1001
Low-priority signal degradation 1010
High-priority signal degradation 1011
Low-priority signal failure 1100
High-priority signal failure 1101
Forced switch 1110
Lockout of protection 1111
Bits 5–8 represent the channel number.
Channel number of protect interface 0
Channel number of working interface 0001–1110
Table 8: Explanation of K2 Byte
Meaning Bit Value (12345678)
Bits 1–4 represent the channel number.
Channel number of protect interface 0
Copyright © 2010, Juniper Networks, Inc. 74
JunosE 11.2.x Physical Layer Configuration Guide