manualshive.com logo in svg

Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Get the Configuration Manual for Juniper JUNOSE 11.2.X MULTICAST ROUTING for free download from manualshive.com. This manual provides detailed instructions on setting up multicast routing on your Juniper device. Ensure seamless communication and efficient data transfer by following the guidelines in this manual. Download it now!

Share
Download
background image

Chapter 6

Managing Tunnel-Service and IPSec-Service Interfaces . . . . . . . . . . . . . . 207

Tunnel-Service and IPSec-Service Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Types of Tunnel-Server Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Dedicated Tunnel-Server Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Shared Tunnel-Server Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Types of Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Tunnel-Service Interface Platform Considerations . . . . . . . . . . . . . . . . . . . . . . . 209

Supported Modules for Dedicated Tunnel-Server Ports . . . . . . . . . . . . . . . . 209

ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . 209
E120 and E320 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Supported Modules for Shared Tunnel-Server Ports . . . . . . . . . . . . . . . . . . . 210

ERX14xx Models and the ERX310 Broadband Services Router . . . . . . . 210
E120 and E320 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Numbering Scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

ERX7xx Models, ERX14xx Models, and the ERX310 Router . . . . . . . . . . . 211
E120 and E320 Routers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

Interface Specifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Supported Applications for Dedicated and Shared Tunnel-Server Ports . . . 212

Redundancy and Interface Distribution of Tunnel-Service Interfaces . . . . . . . . . 212

SMs, ES2-S1 Service IOA, and Shared Tunnel-Server Modules . . . . . . . . . . . 213

Static IP Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Dynamic Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Interface Allocation for Shared Tunnel-Server Modules . . . . . . . . . . . . . 214

ISMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

Tunnel-Service Interface Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Provisioning Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Bandwidth Limitations of Shared Tunnel-Server Ports . . . . . . . . . . . . . 215

Exchanging Tunnel-Server Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Unprovisioned Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Configuring Tunnel-Server Ports and Tunnel-Service Interfaces . . . . . . . . . . . . . 217

Identifying the Physical Location of the Tunnel-Server Port . . . . . . . . . . . . . 217
Provisioning the Maximum Number of Interfaces on a Tunnel-Server

Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Reserving Bandwidth on Shared Tunnel-Server Ports . . . . . . . . . . . . . . . . . . 218
Verifying the Tunnel-Server Interface Configuration . . . . . . . . . . . . . . . . . . . 219
Unprovisioning Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

Monitoring Tunnel-Service Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Part 2

Index

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Copyright © 2010, Juniper Networks, Inc.

xiv

JunosE 11.2.x Physical Layer Configuration Guide

Summary of Contents for JUNOSE 11.2.X MULTICAST ROUTING

































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.2.X MULTICAST ROUTING

Xtore XN200 series XN-004-A1 User Manual preview
XN200 series XN-004-A1
Brand: Xtore Pages: 4
Xtore XN200 series XN-004-A1 Software Manual preview
XN200 series XN-004-A1
Brand: Xtore Pages: 7
MACROMEDIA COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX... Use Manual preview
COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX...
Brand: MACROMEDIA Pages: 90
Red Hat NETWORK SATELLITE SERVER 4.0.5 Installation Manual preview
NETWORK SATELLITE SERVER 4.0.5
Brand: Red Hat Pages: 82
KAPERSKY ANTI-VIRUS BUSINESS OPTIMAL Manual preview
ANTI-VIRUS BUSINESS OPTIMAL
Brand: KAPERSKY Pages: 31
SanDisk FlashSoft Data Management preview
FlashSoft
Brand: SanDisk Pages: 18
Paradyne OPENLANE User Manual preview
OPENLANE
Brand: Paradyne Pages: 86
Avaya IP Agent Installation And User Manual preview
IP Agent
Brand: Avaya Pages: 286
Sanyo VA-SW8000 Instruction Manual preview
VA-SW8000
Brand: Sanyo Pages: 132
Apricorn SMART-ER User Manual preview
SMART-ER
Brand: Apricorn Pages: 20
Apricorn EZ Gig II User Manual preview
EZ Gig II
Brand: Apricorn Pages: 67
Red Hat CLUSTER SUITE - FOR RHEL 4 Overview preview
CLUSTER SUITE - FOR RHEL 4
Brand: Red Hat Pages: 74
Omron SYSMAC CX-Programmer 9 Operation Manual preview
SYSMAC CX-Programmer 9
Brand: Omron Pages: 232
Z3 Technology Z3-DM8169-APP-L1-RPS User Manual preview
Z3-DM8169-APP-L1-RPS
Brand: Z3 Technology Pages: 46
LEI Extras MapCreate Canada 6.3 Addendum preview
MapCreate Canada 6.3
Brand: LEI Extras Pages: 1
Qlogic Fast Fabric User Manual preview
Fast Fabric
Brand: Qlogic Pages: 174
Cabletron Systems 7C03 MMAC SmartSWITCH User Manual preview
7C03 MMAC SmartSWITCH
Brand: Cabletron Systems Pages: 150
Xilinx LogiCORE IP CAN 3.2 Getting Started Manual preview
LogiCORE IP CAN 3.2
Brand: Xilinx Pages: 28

Brands by name

Popular brands

Load more brands