Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 183 / 256

•
Example 6—This example displays the tributary statistics for the tributary 1/1/1 on path
1 on slot 4, port 0.
host1# show controllers sonet 4/0:1/1/1/1 tributary
Tributary 1/1/1
Current Tributary Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 0
Last Tributary Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 0
Current Far End Path Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 0
Far End Last Tributary Interval Counters
Errored seconds = 0
Severly errored seconds = 0
Coding violations = 0
Unavailable seconds = 0
•
See show controllers sonet.
show controllers sonet remote
•
Use to display MIB statistics for the remote end of a channelized T3 interface configured
for MDL or for the remote end of a T1 channel configured for FDL.
•
Specify the all option to display detailed information for all 15-minute intervals.
•
For definitions of the MIB statistics for a T3 connections, see RFC 2496—Definitions
of Managed Objects for the DS3/E3 Interface Types (January 1999).
•
For definitions of the MIB statistics for a T1 connections, see RFC 2495—Definitions of
Managed Objects for the DS1, E1, DS2 and E2 Interface Types (January 1999).
•
Field descriptions for a T3 interface
•
Far End MDL Carrier bit—Status of MDL configuration on remote device connected
to T3 interface
•
set—MDL is configured for carrier mode
•
not set—MDL is not configured for carrier mode
•
Far End Equipment Identification Code—eic string sent by remote device for MDL
•
Far End Line Identification Code—lic string sent by remote device for MDL
•
Far End Frame Identification Code—fic string sent by remote device for MDL
•
Far End Unit Identification Code—unit string sent by remote device for MDL
•
Far End Facility Identification Code—pfi string sent by remote device for MDL
161 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces