Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 245 / 256

•
MaximumInterfaces—Total number of tunnel-service interfaces available on this
module
•
Provisioned Interfaces—Total number of tunnel-service interfaces currently
provisioned on this port
•
HwPresent—Indicates whether a module that supports the specified tunnel-server
port is currently installed in the router: yes or no
•
Example 1—Displays information about a dedicated tunnel-server port on an SM
host1# show tunnel-server
Card Oper Active Max
Port:Appl Type State Interfaces Interfaces Fill
--------------- --------- ------- ---------- ---------- ----
Port 8/0 dedicated present 1 8000 0.0%
ipsec-tunnel down 0 0 0.0%
ipsec-transport down 0 0 0.0%
l2tp up 0 8000 0.0%
gre/dvmrp up 1 4000 0.0%
Appl Totals
ipsec-tunnel 0 0 0.0%
ipsec-transport 0 0 0.0%
l2tp 0 8000 0.0%
gre/dvmrp 1 4000 0.0%
total 2 12000 0.0%
•
Example 2—Displays information about a dedicated tunnel-server port on an ISM
host1# show tunnel-server
Card Oper Active Max
Port:Appl Type State Interfaces Interfaces Fill
--------------- --------- ------- ---------- ---------- ----
Port 2/0 dedicated present 1 8000 0.0%
ipsec-tunnel up 0 0 0.0%
ipsec-transport down 0 0 0.0%
l2tp down 0 8000 0.0%
gre/dvmrp up 1 4000 0.0%
Appl Totals
ipsec-tunnel 0 0 0.0%
ipsec-transport 0 0 0.0%
l2tp 0 16000 0.0%
gre/dvmrp 2 8000 0.0%
total 2 16000 0.0%
•
Example 3—Displays information about a specific shared tunnel-server port
host1# show tunnel-server 2/2/0
Card Oper Active Max
Port:Appl Type State Interfaces Interfaces Fill
--------------- --------- ------- ---------- ---------- ----
Port 2/2 shared present 0 4000 0.0%
ipsec-tunnel down 0 0 0.0%
ipsec-transport down 0 0 0.0%
l2tp up 0 4000 0.0%
gre/dvmrp up 0 4000 0.0%
223 Copyright © 2010, Juniper Networks, Inc.
Chapter 6: Managing Tunnel-Service and
IPSec-Service Interfaces