Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 178 / 256

•
Sync count—Number of times the pattern detector synchronized with the incoming
data pattern
•
Received bit count—Number of bits received
•
Error bit count—Number of bits with errors
•
Number of valid intervals—Number of 15-minute intervals since the line module was
last powered on or reset
•
Time elapse in current interval—Time (seconds) passed in current interval
•
Current Interval Counters—Statistics for the current 15-minute interval
•
P-bit errored seconds—Number of errored seconds encountered by a T3
•
P-bit severely errored seconds—Number of severely errored seconds encountered
by a T3
•
Severely errored frame seconds—Number of severely errored framing seconds
encountered by a T3
•
Unavailable seconds—Number of unavailable seconds encountered by a T3
•
Line code violations—Number of line code violations encountered by a T3
•
P-bit coding violations—Number of coding violations encountered by a T3
•
Line errored seconds—Number of line errored seconds encountered by a T3
•
C-bit coding violations—Number of C-bit coding violations encountered by a T3
•
C-bit errored seconds—Number of C-bit errored seconds encountered by a T3
•
C-bit severely errored seconds—Number of C-bit severely errored seconds
encountered by a T3
•
24 Hour Total counters—Statistics for last 24 hours
•
Example 1—This example shows all T3 controllers on the interface 2/1.
host1# show controllers sonet 2/1 ds3
Ds3 1
Description: ottawa211 ds3
Number of valid interval - 0
Time elapse in current interval - 696
Current Interval Counters
P-bit errored seconds = 0
P-bit severely errored seconds = 0
Severely errored frame seconds = 0
Unavailable seconds = 541
Line code violations = 0
P-bit coding violations = 0
Line errored seconds = 0
C-bit coding violations = 0
Copyright © 2010, Juniper Networks, Inc. 156
JunosE 11.2.x Physical Layer Configuration Guide