Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 177 / 256

Current Interval Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
Line code violations = 0
24 Hour Total Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
Line code violations = 0
•
See show controllers sonet.
show controllers sonet ds3
•
Use to display T3 statistics for the different layers in channelized SONET and SDH
interfaces. Figure 8 on page 109 shows the layers in the interface.
•
For definitions of the MIB statistics, see RFC 2496—Definitions of Managed Objects
for the DS3/E3 Interface Types (January 1999).
•
Specify an interface in slot / port format.
•
To view information for a specific controller in a layer, enter the specifier for the
controller and the type for the controller. For example, to view T3 controller 1 on path
1 on the interface 4/0, enter
show controllers sonet 4/0:1/1 ds3 .
•
To view information for all controllers above a particular layer, enter the specifier for
the layer and the type for the controller. For example, to view all DS3 controllers on
the interface 4/0, enter
show controllers sonet 4/0 ds3 .
•
To view T3 statistics for a layer, specify the controller type, ds3 .
•
To view the configuration for a controller or all controllers in a layer, omit the controller
type.
•
Field descriptions
•
Description—Text description or alias if configured for the interface
•
BERT test—Number of current test and total number of tests
•
Test interval—Length of the BERT test
•
status—Sync (controller is synchronized with remote device) or NoSync (controller
is not synchronized with remote device
155 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces