Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 64 / 256

•
Fractional Interface—Location of a channelized T1 or E1 interface
•
Description—Text description or alias if configured for the interface
•
ifOperStatus—Administrative status of the interface
•
ifOperUp—Interface is functioning
•
ifOperTesting—Interface is being tested
•
ifOperNotPresent—Module has been removed from the chassis
•
ifOperDown—Interface is not functioning
•
ifOperLowerDown—Lower layer in the interface stack is not functioning
•
snmp trap link-status—Enabled or disabled
•
Encapsulation—Layer 2 encapsulation display; options include: ppp, frame-relay
ietf, mlppp, mlframe-relay ietf, hdlc
•
Crc type checking—Size of the CRC
•
Hdlc mru—Current size of the MRU
•
Hdlc mtu—Current size of the MTU
•
Hdlc interface speed—Current line speed of the interface
•
Hdlc idle-character—Current idle character
•
Invert data disabled—Status of the data inversion feature
•
Ds0 time slot map—Channelized T1 or E1 channel group
•
Ds0 mode—Nx56 or Nx64
•
5 minute input rate—Data rates based on the traffic received in the last five minutes
•
5 minute output rate—Data rates based on the traffic sent in the last five minutes
•
Interface statistics
•
Packets received—Number of packets received on the interface
•
Bytes received—Number of bytes received on the interface
•
Errored packets received—Number of packets with errors received on the interface
•
Packets sent—Number of packets sent on the interface
•
Bytes sent—Number of bytes sent on the interface
•
Errored packets sent—Number of packets with errors sent from the interface
•
Example
Copyright © 2010, Juniper Networks, Inc. 42
JunosE 11.2.x Physical Layer Configuration Guide