Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 122 / 256

PLM 27255 0
BIP-B3 (Code Violation) 0 0
Current Far End Path Interval Counters Seconds Counts
ES 0
SES 0
UAS 141
REI 0 0
Far End Last Path Interval Counters Seconds Counts
ES 0
SES 0
UAS 900
REI 0 0
Total Far End Path Counters Seconds Counts
ES 0
SES 0
UAS 27255
REI 0 0
•
Example 2—Shows the MIB statistics for the line layer on interface 1/0.
host1# show controllers sonet 1/0 line
Number of valid intervals - 31
Time elapsed in current interval - 114
Current status = AIS
Current Line Interval Counters Seconds Counts State
ES 0
SES 0
UAS 113
RDI 0 0 OK
AIS 113 0 Active
BERR-SF 0 0 OK
BERR-SD 0 0 OK
BIP-B2 (Code Violation) 0 0
Last Line Interval Counters Seconds Counts
ES 0
SES 0
UAS 900
RDI 0 0
AIS 900 0
BERR-SF 0 0
BERR-SD 0 0
BIP-B2 (Code Violation) 0 0
Total Line Counters Seconds Counts
ES 0
SES 0
UAS 27227
RDI 0 0
AIS 27227 1
BERR-SF 0 0
BERR-SD 0 0
BIP-B2 (Code Violation) 0 0
Current Far End Line Interval Counters Seconds Counts
ES 0
SES 0
Copyright © 2010, Juniper Networks, Inc. 100
JunosE 11.2.x Physical Layer Configuration Guide