Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 179 / 256

C-bit errored seconds = 0
C-bit severely errored seconds = 0
24 Hour Total Counters
P-bit errored seconds = 0
P-bit severely errored seconds = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Line code violations = 0
P-bit coding violations = 0
Line errored seconds = 0
C-bit coding violations = 0
C-bit errored seconds = 0
C-bit severely errored seconds = 0
•
Example 2—This example shows statistics for the T3 controller 1/1 on interface 2/0.
host1# show controllers sonet 2/0:1/1 ds3
Ds3 1
Description: ottawa2011 ds3
Number of valid interval - 0
Time elapse in current interval - 534
Current Interval Counters
P-bit errored seconds = 0
P-bit severely errored seconds = 0
Severely errored frame seconds = 0
Unavailable seconds = 117
Line code violations = 0
P-bit coding violations = 0
Line errored seconds = 0
C-bit coding violations = 0
C-bit errored seconds = 0
C-bit severely errored seconds = 0
24 Hour Total Counters
P-bit errored seconds = 0
P-bit severely errored seconds = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Line code violations = 0
P-bit coding violations = 0
Line errored seconds = 0
C-bit coding violations = 0
C-bit errored seconds = 0
C-bit severely errored seconds = 0
•
See show controllers sonet.
show controllers sonet line | path | section | tributary
•
Use to display statistics for the different layers in channelized SONET and SDH
interfaces. Figure 8 on page 109 shows the layers in the interface.
•
For definitions of the MIB statistics, see RFC 2558—Definitions of Managed Objects
for the SONET/SDH Interface Type (March 1999).
•
Specify an interface in slot / port format.
157 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces