Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 222 / 256

Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Administrative qos-shaping-mode: none
Operational qos-shaping-mode: none
queue 0: traffic class control, bound to FastEthernet2/0
Queue length 0 bytes
Forwarded packets 1, bytes 46
Dropped committed packets 0, bytes 0
Dropped conformed packets 0, bytes 0
Dropped exceeded packets 0, bytes 0
•
See show interfaces.
show interfaces gigabitEthernet
show interfaces tenGigabitEthernet
•
Use to display the status of Gigabit Ethernet interfaces and 10-Gigabit Ethernet
interfaces.
•
You can specify the following keywords:
•
delta —Specifies that baselined statistics are to be shown
•
brief —Displays the operational status of all configured interfaces
•
Field descriptions
•
GigabitEthernet or tenGigabitEthernet interfaceSpecifier —Status of the hardware
on this interface
•
up—Hardware is operational
•
down—Hardware is not operational
•
Administrative status—Operational state that you configured for this interface
•
up—Interface is enabled
•
down—Interface is disabled
•
Hardware—Type of MAC device on this interface
•
Address—MAC address of the processor on this interface
•
MAU—Type of medium attachment unit (MAU) on the primary and secondary physical
ports:
•
SFP—1000BASE-LH, 1000BASE-SX, 1000BASE-ZX; for SFPs that are empty,
SFP (Empty) appears in this field; for SFPs that are installed in the OC3-2 GE APS
I/O module and do not have a Juniper Networks part number programmed, SFP
(GE Compliant) appears in this field
•
XFP—10GBASE-SR (10 Gbps), 10GBASE-LR (10 Gbps), 10GBASE-ER (10 Gbps);
for XFPs that are empty, XFP (Empty) appears in this field
•
TX Output Power—Transmitted output optical power
Copyright © 2010, Juniper Networks, Inc. 200
JunosE 11.2.x Physical Layer Configuration Guide