Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 176 / 256

•
Sync count—Number of times the pattern detector synchronized with the incoming
data pattern
•
Received bit count—Number of bits received
•
Error bit count—Number of bits with errors
•
Number of valid intervals—Number of 15-minute intervals since the line module was
last powered on or reset
•
Time elapsed in current interval—Reported in 15-minute intervals
•
Errored seconds—Number of errored seconds encountered by a T1 or an E1 in the
current interval
•
Severely errored seconds—Number of severely errored seconds encountered by a
T1 or an E1 in the current interval
•
Severely errored frame seconds—Number of severely errored framing seconds
encountered by a T1 or an E1 in the current interval
•
Unavailable seconds—Number of unavailable seconds encountered by a T1 or an E1
in the current interval
•
Clock slip seconds—Number of clock slips encountered by a T1 or an E1 in the current
interval
•
Path code violations—Number of coding violations encountered by a T1 or an E1 in
the current interval
•
Line errored seconds—Number of line errored seconds encountered by a T1 or an E1
in the current interval
•
Bursty errored seconds—Number of bursty errored seconds encountered by a T1 or
an E1 in the current interval
•
Degraded minutes—Number of minutes that a T1 or an E1 line is degraded
•
Line code violations—Number of line code violations encountered by a T1 or an E1 in
the current interval
•
Example—This example displays statistics for all the E1 lines on the interface 2/0.
host1# show controllers sonet 2/0 e1
E1 1/1/1
Description: boston111 e1
BERT test - 2 in 11
Test Interval 1 minute(s), Running - Status is Sync
0 minute(s), 33 second(s) left in test interval
Sync count = 1
Received bit count = 41472000
Error bit count = 0
Number of valid interval - 0
Time elapse in current interval - 0
Copyright © 2010, Juniper Networks, Inc. 154
JunosE 11.2.x Physical Layer Configuration Guide