Juniper JUNOSE 11.2.X MULTICAST ROUTING, Configuration Manual

Page: 187 / 256

Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
DS1 24 Hour Total Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
•
See show controllers sonet remote.
show interfaces serial
•
Use to display information about the serial interfaces you specify.
•
Field descriptions
•
Serial Interface—Location of the interface
•
Description—Text description or alias if configured for the interface
•
ifOperStatus—Physical state of the interface
•
ifOperDown—Interface is not functioning
•
ifOperLowerLayerDown—Lower layer in the interface stack is not functioning
•
ifOperNotPresent—Module has been removed from the chassis
•
ifOperTesting—Interface is being tested
•
ifOperUp—Interface is functioning
•
snmp trap link-status—Enabled or disabled
•
Encapsulation—Layer 2 encapsulation display; options: ppp, frame-relay ietf, mlppp,
mlframe-relay ietf, hdlc
•
Crc type checking—Size of the CRC
•
Hdlc mru—Current size of the MRU
•
Hdlc mtu—Current size of the MTU
•
Hdlc interface speed—Current line speed of the interface
•
Hdlc idle-character—Current idle character
•
Invert data disabled—Status of the data inversion feature
165 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Configuring Channelized OCx/STMx Interfaces