imagistics ipc1- im8130, Administrator'S Manual

Page: 200 / 377

178 ipc1-im8130 Administrator’s Guide
If this option is not specified, the default value is used.
Example: The command to set the top margin to ten lines is
lp –o tm=10
<filename>
.
Paper Source
Specify the current paper source using the following options.
In PostScript,
Deferred Media Selection
is always turned on so the paper size
has priority over the paper source. In PCL5e the paper size always has
priority over the paper source.
If this option is not specified, the default value is used.
Example: The command to specify the LCF paper source is
lp –o lcf
<filename>
.
Text Length
Specify the text length with the following option.
If the text length is set too high, part of the text may not appear because
of the printer-specific unprintable region. The text length is ignored if it is
set to a value greater than the logical page length minus the top margin.
Paper Source Options
Option Value Alternate Value Description
auto-source Select auto paper tray selection.
manual Select the manual/bypass paper tray.
upper cas1 Select the upper paper tray.
lower cas2 Select the lower paper tray.
tandem Select the tandem LCF paper tray.
external Select the external paper tray.
pedupper cas3 Select the pedestal upper paper tray.
pedlower cas4 Select the pedestal lower paper tray.
inserter Select the inserter bin.
Text Length Option
Option Value Description
tl= value Set the text length to value lines.
im6530, im8130