imagistics ipc1- im8130, Administrator'S Manual

Page: 31 / 377

ipc1-im8130 Administrator’s Guide 9
Microsoft
Workgroup WORKGROUP The Microsoft Workgroup Name is mandatory for
Microsoft print services. Additionally, it is required
if you want to update the controller software using
Printer Utility.
IPX/SPX
(Ethernet only) Auto Sense The controller attempts to automatically sense the
IPX frame type. This facilitates automatic device
discovery. However, if you are running a TCP/IP-
only network, disable IPX/SPX to eliminate
unnecessary network traffic.
NetWare Printing Disabled For NDPS support, you must configure the
controller as an NDS PSERVER or NPRINTER.
NDPS is a separate software component NLM,
which you must install on the NetWare file server.
Microsoft print
services Enabled Peer to Peer SMB/NETBIOS printing on TCP/IP or
IPX/SPX. The printer name portion of the port
name is DSSC, which you cannot modify.
LPD Printing Enabled The queue name is DSSC, which you cannot
modify.
EtherTalk Phase II Currently, Macintosh printing is supported only
over EtherTalk;
TokenTalk is not supported .
AppleTalk Name GL< MAC Address > <MAC Address> is the unique machine address of
the NIC installed in the controller.
AppleTalk Type LaserWriter You cannot modify this setting.
AppleTalk Zone * Default (local) zone. If you have defined more
than one AppleTalk zone, the controller appears in
the default zone unless you specify another zone
manually.
Macintosh
Printing Enabled For Macintosh print services, you must have an
Ethernet NIC installed in the controller.
HTTP Server Enabled The HTTP server is integral for device
management and job monitoring. Therefore, you
cannot disable it.
IPP Enabled IPP works only over TCP/IP.
Default Controller Settings
Property Default Setting Comments
im6530, im8130