imagistics ipc1- im8130, Administrator'S Manual

Page: 117 / 377

ipc1-im8130 Administrator’s Guide 95
operates in a NetWare environment (IPX), this default setting generates
unnecessary TCP/IP traffic.
You must log in as an administrator to set network protocol properties.
Enabling/Disabling the Ethernet NIC
Disabling the ethernet NIC disables the wired network path for the
controller and digital copier. If you have set up a wireless network, you
can still use the network-related functions of the controller. If you do not
have a functioning network connection, you can only use the device for
walk-up functions.
1
Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab.
3 Click the
Network
link. The Network page opens.
4 In the Device area, click the
Network Card
drop-down list.
5 Select
Enable
or
Disable
.
6 Click
Save
.
7 If you change the TCP/IP protocol settings or enable/disable a
network card, you must reboot the controller before the changes take
effect.
For information on rebooting the controller, see
Rebooting the
Controller on page 30.
Configuring Ethernet NIC Speed
The ethernet NIC speed is set to
Auto
by default. If you use a consistent
speed for all networked devices and transactions, you can set the speed
specifically. You may also want to set the speed manually if you are
experiencing speed-related network errors.
im6530, im8130