imagistics ipc1- im8130, Administrator'S Manual

Page: 213 / 377

ipc1-im8130 Administrator’s Guide 191
„
Windows 2000
„
Microsoft Windows 2000 Service Pack 1 or higher
„
Novell Client v4.7 or higher with Z.E.N works Starter Pack is
required to run IPX-based SNMP access and Novell printing.
„
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
„
Windows XP
„
Novell Client v4.82 or higher is required to run IPX-based SNMP
access and Novell printing.
„
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
„
At least 60 MB free disk space on the destination drive; 120 MB for
optimal performance.
To ensure successful implementation:
„
Close all Windows applications before installing the new software.
If an old version of Imagistics client software is installed, right-click
the document monitoring application icon in the system tray, then
choose
Exit
from the short-cut menu.
„
If your workstation had a previous version of Imagistics software
installed, the setup program detects it and opens the Client Setup
Maintenance Program. Click
Remove
to delete all previously installed
components.
You can also use the Windows Add/Remove Programs option,
accessible from the Windows Control Panel, to delete the old software.
Client Setup
1 Insert the ipc1-im8130 Client CD-ROM into the workstation CD-ROM
drive. If
Auto-Run
is enabled, the InstallShield Setup Wizard starts
automatically.
Otherwise, choose
Run
from the Start menu and then locate the
Setup.exe
file on the CD-ROM. Click
OK
to launch the setup
program.
2 Follow the Setup Wizard through the installation steps. When
prompted:
„
Enter a destination directory or accept the default location.
„
Select the drivers and fonts to install.
im6530, im8130