imagistics ipc1- im8130, Administrator'S Manual

Page: 124 / 377

102 ipc1-im8130 Administrator’s Guide
1 Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab.
3 Click the
Wireless Network
link. The Wireless Network page opens.
4 In the SMB area of the Wireless Network page, click the
Protocol
drop-
down list.
5 Select
Enable
to enable the SMB protocol.
6 In the
Device Name
field, enter the controller name.
7 Enter the name of the
Workgroup
the controller belongs to.
8 Enter the address of the
Primary WINS Server
.
9 Enter a
WINS Scope ID
for the controller.
10 To set the controller as a master browser, click the
Master Browser
drop-
down list and select
Enable
.
11 Click
Save
.
Configuring AppleTalk Settings
If you are using the AppleTalk networking protocol for any wireless
network traffic involving the controller, you must enable the AppleTalk
protocol on the wireless NIC. The AppleTalk protocol is enabled by
default. If you are not using AppleTalk for any wireless network traffic,
disabling the AppleTalk protocol on the wireless NIC reduces overhead
and improves efficiency.
1
Log in as an administrator.
2 On the Administration tab, click the
Setup
subtab.
3 Click the
Wireless Network
link. The Wireless Network page opens.
4 In the AppleTalk area, click the
Protocol
drop-down list.
5 Select
Enable
to enable AppleTalk.
6 Enter the
AppleTalk Zone
string.
7 Click
Save
.
Configuring the Wireless NIC Settings
If you are using the wireless network for any network traffic involving the
controller, you must enable the wireless NIC on the controller. The
wireless NIC is enabled by default. If you are not using the wireless
network for any network traffic, disabling the wireless NIC on the
controller reduces overhead and improves efficiency.
im6530, im8130