imagistics ipc1- im8130, Administrator'S Manual

Page: 115 / 377

ipc1-im8130 Administrator’s Guide 93
can print a document set up for letter size on A4 paper. When disabled,
the controller prompts you for the correct paper size.
1
Log in as an administrator.
2 Click the
Administration
tab.
3 On the
Device
subtab, click
Printer
. The Print Settings page opens.
4 Use the
LT<-->A4/LD<-->A3
drop-down menu to enable or disable this
feature.
5 Scroll down to the end of the page and click
Save
.
Setting Print Startup Page
This feature cuases the printer to print a test page whenever is starts up.
The test page can help you verify that the printer is properly connected
and ready for use.
1
Log in as an administrator.
2 Click the
Administration
tab.
3 On the
Device
subtab, click
Printer
. The Print Settings page opens.
4 Click the
Print Startup Page
drop-down menu.
5 Select
Yes
or
No
.
6 Scroll down to the end of the page and click
Save
.
Setting Toner Save Mode
Toner Save Mode causes the printer to adjust certain print characteristics
to reduce the amount of toner used. This feature is most useful when
printing large numbers of documents with saturated areas (areas
completely covered with black).
1
Log in as an administrator.
2 Click the
Administration
tab.
3 On the
Device
subtab, click
Printer
. The Print Settings page opens.
4 Click the
Toner Save Mode
drop-down menu.
5 Select
On
or
Off
.
6 Scroll down to the end of the page and click
Save
.
Setting iFax Output
You can control the output of the iFax in two ways. You can select duplex
output and you can select which tray the document prints from.
im6530, im8130