imagistics ipc1- im8130, Administrator'S Manual

Page: 43 / 377

ipc1-im8130 Administrator’s Guide 21
2 Set the network speed to
10
MB
/
S
or
100
MB
/
S
. Alternatively, select
AUTO
to automatically sense and set the correct speed.
3 Press
OK
to save your setting.
Configuring AppleTalk Protocol Settings
1 From the Network Setting menu, press
APPLETALK
to open the
AppleTalk Setting screen.
AppleTalk Setting Screen
Note: Currently, the controller supports EtherTalk access only;
TokenTalk is not supported.
2 By default, Macintosh printing is enabled. If it has been disabled,
press
ENABLE
to establish Macintosh print services.
3 Press
APPLETALK NAME
to display the touch keyboard.
4 Enter the AppleTalk name. The name is the same as the Microsoft
computer name (device name).
By default, the device name is GL<MAC Address>, where <MAC
Address> is the media access control number of the NIC installed in
the controller. For example,
GL00DOC9165206
. You can specify a
different name of up to 15 alphanumeric characters, provided it is
unique within your network.
im6530, im8130