imagistics ipc1- im8130, Administrator'S Manual

Page: 186 / 377

164 ipc1-im8130 Administrator’s Guide
1 After you install the filter, run the command:
find / -name
net_ipc1im8130
.
2 Run the command
more <PATH>/net_ipc1im8130
. This file contains
all of the valid options that you can use.
Use these commands as follows:
„
Locate the command of interest. For example:
nobanner | nb )
banner="none"
„
The valid option to enter into the
<queue name>.conf
file is:
banner="none"
With some of the options you have to set more than one parameter. For
example, for booklet printing, locate
booklet=letter | booklet=lt | booklet=LT )
booklet="LT"
booklet_paper="LETTER"
The valid option to enter into the
<queue name>.conf
file is
booklet="LT"
booklet_paper="LETTER"
The values stored in this file are case sensitive and they must conform to
the
/bin/sh
variable format.
Printing to the Controller in Unix
LP Command
Use the
lp
command (
lpstat
in Linux) to send a file to the controller for
printing. This command specifies various printer-specific options using
the
-o option
parameter on the command line. The
lp
command also
sets other print options using various other parameters. Use the
man
net_ipc1im8130.1
command to view the online document that describes
the various options and parameters that you can set to configure printed
output.
All the options are sent to the controller at the start of a print job so, if the
print file contains its own commands, they may override the
lp
options.
im6530, im8130