imagistics ipc1- im8130, Administrator'S Manual

Page: 126 / 377

104 ipc1-im8130 Administrator’s Guide
Troubleshooting
Setting Up Network Print Services
The following topics explain how to configure network printing services.
Configuring Bluetooth (Option)
If you intend to use the bluetooth wireless networking option, you must
enable and configure bluetooth network settings.
Problem Solution
Transfer rate says “No connection” Verify the access point is working
Transfer rate says “No connection” Verify SSID matches the access point
Transfer rate says “No connection” Verify WEP against the access point
There is a connection to the access point
but the printer is not visible on the network Verify that the indicated settings on the
Intel card are all disabled. If it still fails,
increase the
Transmit Power Setting
.
There is a connection to the access point,
the authentication mode is
Open System
,
and the printer is not visible on the
network
Verify that the indicated settings on the
Intel card are all disabled. If it still fails,
make sure that the
WEP key
of the client
and the Access Point (AP) match.
im6530, im8130