imagistics ipc1- im8130, Administrator'S Manual

Page: 190 / 377

168 ipc1-im8130 Administrator’s Guide
If this option is not specified, the default value of nopunch is used.
This function is not available for all paper sizes and users should refer to
the copier manual for a list of compatible paper sizes. In particular, A5,
A6, and statement paper sizes do not support this function.
Example: The command to hole punch the long edge feed portrait page is
lp –o punch=1 <filename>
.
Media Type
You can select the paper source and the media type using the following
options.
In PostScript,
Deferred Media Selection
is always turned on so the paper size
has priority over the media type and the paper source. In PCL5e the paper
size always has priority over the media type and the paper source.
If this option is not specified, the default value is used.
Example: The command to specify letterhead media type is
lp –o
mtype=Letterhead <filename>
.
punch=2 Hole punch short edge without rotation.
punch=3 Hole punch long edge with 180° rotation.
punch=4 Hole punch short edge with 180° rotation.
Media Type Options
Option Value Description
Plain The paper source that contains plain paper is requested.
Transparency The paper source that contains transparency slides is requested.
Tab The paper source that contains tab paper is requested.
Thick1 The paper source that contains disk labels is requested.
Thick2 The paper source that contains letter labels is requested.
Cover The paper source that contains cover paper is requested.
Insert The paper source that contains insert paper is requested.
Special The paper source that contains special paper is requested.
Hole Punch Options
Option Value Alternate Value Description
im6530, im8130