imagistics ipc1- im8130, Administrator'S Manual

Page: 189 / 377

ipc1-im8130 Administrator’s Guide 167
If this option is not specified, the printer default value is used.
Example: The command to staple in the upper left corner of a long edge
feed portrait page is
lp –o staple=1 <filename>
.
The value for the stapling position depends on the paper size, the paper
feed direction, and the print direction. This function is not available for
all paper sizes and users should refer to the copier manual for a list of
compatible paper sizes. In particular, A5, A6, and statement paper sizes
do not support this function.
Output Bin
Specify the output bin using the following options.
If this option is not specified, the default output tray is used ( bin 2 ).
Example: The command to specify output bin 1 is
lp –o bin1
<filename>
.
Hole Punching
When the hole punch option is installed it can be activated using the
following options.
staple=9 Put 2 staples in the middle of a landscape page and fold the paper in half
vertically along the staple line (saddle stitching). This command works in
conjunction with booklet printing. This command has no affect on long-
edge-feed paper.
Output Tray Options
Option Value Description
bin1 Selects the upper output tray.
bin2 Selects the lower output tray.
Hole Punch Options
Option Value Alternate Value Description
punch=0 nopunch Hole punching is turned off.
punch=1 Hole punch long edge without rotation.
Stapling Options
Option
Value
Description
im6530, im8130