imagistics ipc1- im8130, Administrator'S Manual

Page: 164 / 377

142 ipc1-im8130 Administrator’s Guide
„
4.x/5.x Mixed Mode
10 In the
Print Server Name
field, enter the name of the print server you
created (Step 1 on page 140), for example,
ipc1_2_PS
.
11 In the
Printer Number
field, enter the number assigned to the printer you
created (Step 3 on page 140).
For Bindery mode, the number is between
0
and
15
; for NDS mode, the
number is between
0
and
254
.
12 Scroll to the bottom of the page, then click
Save
.
13 Proceed to Installing Client Software on page 189.
Print Server Mode
Considerations and Limitations
„
You must enable IPX/SPX protocol before running the controller in
print server mode.
„
You cannot attach any other printers to a controller running in print
server mode. This supersedes the 255-printer limit imposed by
NetWare.
Prerequisites
Use the NetWare management utility PCONSOLE (for NetWare 4.x bindery
mode) or NWAdmin (NetWare 4.x, 5.x, or 6.x NDS mode) to perform the
following steps before enabling Novell print services through Printer
Utility.
Note: When using NetWare PCONSOLE version 4.x.x., toggle between
NDS and Bindery modes using the F4 key.
For more information, refer to your Novell NetWare documentation.
im6530, im8130