imagistics ipc1- im8130, Administrator'S Manual

Page: 26 / 377

4 ipc1-im8130 Administrator’s Guide
wireless networking, optimize network settings, and customize device
properties.
On networks running TCP/IP, you can also perform these functions
using the controller embedded web utility, Printer Utility.
„
Install client software on your workstation, including the document
monitoring utility, ipc1 Document Monitor, and applicable printer
drivers, filters, or PPD files.
You or your users can use the CD or Printer Utility to install client
software on individual workstations.
Hardware Installation
Digital Copier
The Imagistics Electronic Document Processing System is installed by
your certified Imagistics service technician usually prior to and
independent of the network implementation.
Controller
Your Imagistics service technician also installs the controller, which is
physically mounted on the back of the digital copier and connected to the
PCI bridge board.
Network Interface Card
The controller ships with an embedded Ethernet NIC. To connect the
controller to an Ethernet network, insert the network cable into the
socket on the card.
To support a wireless LAN, you can install a Cisco Aironet 350 PCI
802.11b Wireless NIC.
Network Configuration
Once the service technician has finished installing the controller and
copier hardware, you can configure the controller software.
Use the copier LCD touch screen to perform the following administrative
functions:
„
Enable or disable the network cards.
„
Set the Transmission Control Protocol/Internet Protocol (TCP/IP)
addressing mode to employ Dynamic Host Configuration Protocol
(DHCP) services, or manually enter the addressing information.
im6530, im8130