imagistics ipc1- im8130, Administrator'S Manual

Page: 29 / 377

ipc1-im8130 Administrator’s Guide 7
„
LPR/LPD on TCP/IP, provided Microsoft TCP/IP printing services are
installed on the client workstation
„
Internet Printing Protocol (IPP) with an IPP port configured on the
client workstation.
Novell Print Modes
The controller supports the following Novell NetWare printing modes:
„
NetWare 4.x Bindery mode PSERVER or RPRINTER
„
NetWare 4.x, 5.x, or 6.x NDS mode PSERVER or NPRINTER
„
NetWare NDPS printer agent (using the Imagistics NLM-based
gateway)
Unix Print Modes
The controller supports LPR/LPD printing for the Unix Sun Solaris, HP-
UX, IBM AIX, and Linux environments, providing you install the
Imagistics filters.
Macintosh Print Mode
The controller supports the following Macintosh printing modes:
„
AppleTalk
„
LPR/LPD (over TCP/IP only)
Choose a Device Naming Convention
Device Name
Decide on a unique name for the device, such as the host name. Both
Microsoft and Macintosh printing, and controller software updates
require a device name.
By default, the Microsoft Computer name is set to
GL< MAC Address >
,
where MAC Address is the unique Media Access Control address of the
NIC installed in the controller. You may rename the device to retain
consistency within your network. Choose a unique name of up to 15
alphanumeric characters.
Do not use the underscore (“_”) or at (“@”) characters in the device
(controller) name.
im6530, im8130