Start Here
Easy Setup Instructions
1
Unpack the Printer
2
Prepare the Printer
3
Install the Print Head
4
Install the Ink Tanks
Carefully remove all items from the box.
Documentation and
Software Kit
Print Head
AC Adapter
Power Cord
1
Remove the shipping materials from the printer.
Plug the Power Cord into the AC Adapter. Connect the DC
plug to the printer. Plug the Power Cord into a power outlet.
NOTE:
You will need the Serial Number to register the product.
Lift open the Paper Support and
TURN THE PRINTER ON
. The
printer will initialize.
IMPORTANT:
Do not open the Print Head Cover before the print-
er has finished initializing. Wait until the POWER lamp remains
fully lit.
After the printer finishes initializing, open the Print Head
Cover.
4
3
2
1
Remove the Print Head from its package.
Remove the Protective Cap from the Print Head.
NOTE:
Do not touch the Print Head Nozzles.
Press in on the Lock Button and raise the gray Lock Lever.
Place the Print Head into the holder by aligning the
mark with the
mark.
Lower the Lock Lever until it clicks into place.
5
4
3
2
1
Remove the Black Ink Tank(BCI-15 Black) from its package,
and pull off the Protective Cap.
NOTE:
To avoid spilling ink, do not touch the bottom of the tank
once you have removed the Protective Cap.
Insert the Black Ink Tank into the back slot aligning the
mark with the
mark.
Press on the
until the Ink Tank clicks into place.
IMPORTANT:
For correct printer operation, make sure ink tanks
are secure in slots.
Repeat the procedure for the Color Ink Tank(BCI-16 Color),
inserting it into the front slot.
Close the Print Head Cover.
NOTE:
The printer will perform a Print Head cleaning after the
cover is closed. Wait until the process is complete before pro-
ceeding.
5
4
3
2
1
Continue with Step 5
on side two.
BCI-15 Black
Ink Tanks
BCI-16 Color
Ink Tanks
PIXMA iP90
Photo Printer
Nozzles
AC Adapter
DC Plug
Power Cord
Serial Number
Paper Support
Paper Output Slot Cover
Print Head
Cover
Print Head
Cover
1
2
3
Print Head Cover
mark
