All type
Page
2/5
Engine Maintenance General
Hydraulic Screw Tightenings
엔진
정비
일반사항
유압
나사
체결
절차서
Section No.
G09500
Rev.
1A
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 05.04/KJC
각 나사는 고유의 유압 잭 및 나사 크기에 일치하는
지지대 세트가 필요하다. 작업 여건에 따라, 익스텐션 나
사가 그림 4와 같이 잭에 추가된다.
Each screw needs own set of hydraulic jack and
support for the corresponding screw size. Depending
on the working condition, extension screw should be
added for the jack as shown in fig 4.
Fig. 2 Hydraulic tightening tool set with 4 ports distributing piece
(4 포트 디스트리뷰팅 피스를 사용한 유압 체결 공구 세트)
Fig. 3 Hydraulic tightening tool set with 2 ports distributing piece
(2 포트 디스트리뷰팅 피스를 사용한 유압 체결 공구 세트)
Distributing Piece
(Extra tool)
(Extra tool)