All type
Page
1/2
Troubleshooting
Starting Failure
문제해결
시동
불가
Section No.
O04100
Rev.
1A
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 05.04/KJC
엔진이 시동되지 않는 경우
1.
엔진이
‘
시동 준비
’
상태가 아닐 때
‘
START READY
’
램프가 켜진 후, 시동이 시도
되었는지 확인한다.
시동을
준비하고
리셋한다
.
제어 시스템과 가버너의 기능을 점검한다.
2.
플라이휠이 회전하지 않을 때
‘
STRAT
’
버튼을 눌렀는데도 공기 모터로부터
나오는 시동 공기 소음이 들리지 않을 때
시동 공기 공급 라인용 밸브가 열려있는지
를 확인한다.
공기 모터용 솔레노이드 밸브의 기능을 점
검한다.
공기 모터 설명서 참조
시동 공기 모터가 회전하지 않을 때
공기 모터의 솔레노이드 밸브의 기능을 점
검한다.
공기
모터
설명서
참조
시동 공기 모터가 회전할 때
피니언 기어와 링 기어를 점검한다.
피니언 기어가 맞물리지 않으면, 시동
을 다시 해본다.
기어 파손 시에는, 교체한다.
엔진 내부의 구동 부위를 점검한다.
베어링이나 피스톤이 고착되면 보수
한다.
3.
플라이휠이 너무 천천히 회전할 때
오일 온도를 확인한다. (아주 높은 점도)
너무 낮으면, 엔진을 예열 시킨다.
시동 공기압과 새는 곳을 점검한다.
너무 낮으면 보충한다.
새는 곳이 있으면 수리한다.
엔진에 부하가 걸려 있는지를 확인한다
부하가 걸렸으면, 부하를 제거한다.
Engine does not start
1. Engine is not under ‘START READY’ condition
Check whether starting tried after ‘START
READY’ lamp ‘ON’.
Prepare for starting and reset.
Check function of control system and
governor.
2. Flywheel does not rotate.
No starting air noise from air motor when
pressing ‘START’ button.
Check valves for starting air supply line
opened.
Check function of solenoid valves on air
motor.
See Manual for Air Motor
Starting air motor does not rotate.
Check function of solenoid valves on air
motor.
See Manual for Air Motor
Starting air motor rotate.
Check pinion gear and ring gear
Try starting again, if pinion gear
engaging failed.
Replace the gear, if broken.
Check moving parts of engine inside
Repair if bearing or piston seized.
3. Flywheel rotate, but too slowly
Check oil temperature. (Too high viscosity)
Warm up the engine, if too low.
Check starting air pressure and leakage.
Charge air, if too low
Repair, if leaked.
Check engine under load.
Release the load, if loaded.
O02300
O02300
A42000
A42000