H21/32
Page
2/5
Engine driven C.W. Pump
Maintenance Procedure
엔진
구동
냉각수
펌프
정비점검
절차
(
조립
)
Section No.
M71000
Rev.
1A
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 08.01/YJB
3. 플러그에 록타이트 620를 도포 후 그림 3과 같이
플러깅한다.
4, 메카니칼 씰의 시트 링의 외경에 그리스를 도포하여
그림 4와 같이 삽입한다.
5. 1항에서 먼저 조립된 축을 고무 망치를 이용하여 그림
5와 같이 펌프 하우징에 조립한다.
3. The plug is coated with loctite 620 and tighten as
shown in Fig.3.
4. The seat ring of mechanical seal is greased on
outside and inserted as shown in Fig.4.
5. The shaft which is sub-assembled together with
bearing is mounted on pump housing by rubber
hammer as shown in Fig.5.
Fig.3 Plugging with Loctite 620 (
록타이트
620
도포후
플러깅
)
Fig.4 Assembly of seat ring of mechanical seal (
메카니칼
씰의
시트링
조립
)
Fig.5 Assembly of sub-assembled shaft into pump housing (
서버조립된
축을
펌프하우징에
조립
)