All type
Page
2/2
Special Operation
Running-in after Renewal of Sliding Parts
비정상
운전
구동부
부품
교체
및
길들임
운전
Section No.
O03100
Rev.
1A
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 05.04/KJC
길들임 운전 후, 엔진은 정상적인 운전에 투입할
수 있다.
길들임 운전의 목적은 다양한 엔진의 부
하에 대해 구동 부위의 면을 맞추기 위해서 입니다. 따라
서, 초기에 일정한 부하로 엔진을 계속 가동시켜서는 안
됩니다.
피스톤을 분해/점검한 경우에도 피스톤
링의 위치 변경에 따라 길들임 운전이 필요합니다.
길들임 운전은 통상 사용하는 윤활유와
연료로서 수행해야 합니다.
After running-in, the engine can be in normal
service mode.
The purpose of running-in is to fit
the sliding surfaces for various load cases,
therefore,
do not
run
the engine
with
continuous load in initial stage.
In
case
of
piston
overhaul,
running-in is also necessary to refit new
position of piston rings.
Running-in can be done by using
normal lubrication oil and fuel oil of either
distillate or heavy fuel.
Fig. 1 Running-in time and load
(길들임 시간과 부하)
0%
25%
50%
75%
100%
0
0.25
0.5
0.75
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.25
3.5
Time (시간)
Load (부하)