All type
Page
3/4
Fuel Oil and Its Control
Fuel Oil Specification
연료
및
관리
연료
사양
Section No.
G05100
Rev.
1D
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 08.10/KCM
3)
점도의
제어
12 ~ 18 cSt의 분사 점도를 유지하기 위해, 가
열기는 연료가 엔진 연료 시스템에 들어가기 전에
자동 점도 조절기에 의해 제어되어야 한다.
고
점도
또는
저
점도로
인해
연료분사
시스템에
심각한
손상을
초래할
수
있습니다
.
3.
표준
연료
특성치
엔진은 정격 출력의 감소 없이 다음과 같은 사양을 가
진 연료로 연속 운전되도록 설계되었다.
3) Viscosity
Control
In order to ensure correct injection viscosity
of 12 ~ 18 cSt, the heater are to be controlled
by an automatic viscosity controller before the
fuel enters into the engine fuel system.
Higher or lower viscosity may
cause serious damages on fuel injection
system.
3. Standard Fuel Oil Characteristics
The engine is designed to operate continuously
on the fuels with the following specifications
without reduction of the rated output,