H21/32
Page
1/6
Fuel Injection Valve
Maintenance Procedure
연료
분사
밸브
(1-stud)
정비점검
절차
Section No.
M52000
Rev.
1E
HYUNDAI HEAVY INDUSTRIES CO., LTD
.
Engine & Machinery Division 09.08/YTY
특정 실린더의 배기 온도가 다른 실린더와 현저하게
차이가 나는 경우, 연료 분사 밸브를 분해하여 검사해
야 한다. 가능성 있는 원인으로는 연료 분사 밸브의 잘
못된 설치, 연소실로 공급되는 연료의 균일하지 못한
분사 및 밸브 열림 압력의 잘못 등이 있다.
연료 분사 밸브를 설치하기 전에는 반드시 핸드 펌
프를 사용하여 분사 밸브의 기능 시험을 하여 정상적으
로 작동하고 있는지를 점검해야 한다.
연료 분사 밸브를 실린더 헤드로부터 분해
1.
너트 (A)를 풀어낸다.
2.
지지대 (B)를 연료 분사 밸브에서 분리해 낸다.
In case that the exhaust temperature of a
particular cylinder deviates considerably from the
others, dismount and inspect the fuel injection valve
carefully. The possible causes are an incorrect
mounting of fuel injection valve, or uneven injection
of fuel oil to combustion chamber, or wrong valve
opening pressure.
In order to check correct operation of the fuel
injection valve, functional test should be performed
by means of the hand pump before mounting the
fuel injection valve.
Dismantling Fuel Injection Valve from Cyl. Head
1. Unscrew the nuts (A).
2. Dismantle the support (B) from fuel injection
valve.
Fig.1 Dismantling of fuel injection valve
(연료 분사 밸브의 분해)
Seal ring
Bush
※
The copaslip should not be coated
between seal ring and bush to prevent
the gas leak by uneven film thickness
of the copaslip.
91.130
A
B
D
C